Skip to content.  
  • Outdoor CPE
  • 300Mbps(2.4GHz)
  • 2x 5dBi Detachable Antenna
  • Transmit Power and Distance Control (ACK timeout)
  • Signal Strength Display
  • IP65 Waterproof housing
  • 4 Operation Modes: AP/CB/CR/WDS
  • 2x 10/100 LAN Ports
  • PoE Support
More details

Available from Solwise Ltd or one of our UK EnGenius Resellers.


Order now


ENS202EXT Wireless Outdoor unit provides not only external antenna connectors for antenna upgrade, but also high output power and high sensitivity can extend the transmission range to deliver a stable wireless connection. ENS202EXT integrates 4 operation modes: Access Point, Client Bridge, Client Router and WDS.

Advanced multi-function operation modes offer flexibility in constructing scalable wireless networks for all possible applications. ENS202EXT is designed to deliver reliable service under harsh outdoor environment with certified IP65 protection and tailored to accommodate multimedia streaming services with data-rate up to 300Mbps.

Most importantly, it is built-in encryption standards (WEP, WPA, WPA2, TKIP/AES and IEEE802.1x) ensure maximum security and compatibility.


High Output Power

Transmit high output power programmable for different country selections

High Data Rate

High speed transmitting rate up to 300Mbps with 2T2R 802.11n

Long Range Transmitting

Transmit power control and distance control (ACK timeout)

Signal Strength Display

Indicate RF signal strength to be shown as LEDs of 3 colors, making network build-up easier. LED indicators have the best transmit and receive signal for traffic communication

PoE Support

Support proprietary 24V passive power over Ethernet


Download full datasheet


Multiple SSID

4 SSID supported. Each SSID can set itself wireless or WAN access setting


Point-to-Point Protocol over Ethernet at Client Router mode. This function will keep trying when failed or disconnected


Point-to-Point Tunneling Protocol (PPTP) is a method for implementing virtual private networks

VLAN Pass-through

Support VLAN Pass-through

Firmware Upgrade

Upgrading firmware via web browser, setting are reserved after upgrade

Reset & Backup

Reset to factory default. User can export all setting into a file via WEB

Ping & Trace Route

Built-in PING function & Trace Route function in Web GUI


MIB I, MIB II(RFC1213), Private MIB


V1, V2c, V3

Hardware Specifications


Atheros AR9341

Physical Interface

2 x RJ-45 for 10/100 Fast Ethernet

1 x Reset Button

Power Requirements

Active Ethernet (Power over Ethernet)

Proprietary PoE design

Power Adapter 24V / 0.6A

Wireless Specifications

Frequency Band


Data Rate



2 x 5dBi dipole antenna

Antenna Connector

2 x Reverse SMA

Operation Mode

Access Point / Client Bridge / Client Router / WDS


Auto Channel Selection (Setting varies by Regular Domains)

Obey Regulatory Power

Distance Control (802.1x Ack timeout)

CLI Supported

802.1x Supplicant (CB Mode)

Multiple SSID (4 SSID), BSSID

WDS AP / WDS Bridge / WDS Station

Multicast Supported

RADIUS Accounting

VLAN Tag / VLAN Pass-through

Auto Reboot

WiFi Scheduling


WEP Encryption-64/128/152 bit

WPA/WPA2 Personal (WPA-PSK using TKIP or AES)

WPA/WPA2 Enterprise (WPA-EAP using TKIP)

Hide SSID in beacons

MAC address filtering, up to 50 field

Wireless STA (Client) connected list



Physical & Environment

Temperature Range Operating -20°C~70°C
Storage -30°C to 80°C
Humidity (non-condensing) 0%~90% typical
Dimensions 186mm (L) x 100mm (W) x 29mm (H)
Weight 300g


File Link Published
Firmware for this product should only be sourced via the EnGenius Networks Europe B.V. websites. If it is sourced elsewhere it may damage your device and invalidate the warranty. We can't provide service support to devices which are not running with ETSI firmware. EnGenius Networks Europe B.V. Downloads Site 27.10.16
EZ Controller Software release notes Download here 06.10.14
EZ Controller NMS Software Ver 3.7.2 Download here 15.05.14
CE Document Download here 29.10.13
User Manual Download here 29.10.13