ENH210EXT Wireless Outdoor Enterprise Access Point features 2 x N-type external connectors with high output power and high sensitivity can extend the transmission range to deliver a stable wireless connection. ENH210EXT integrates 4 operation modes: Access Point, Client Bridge, Client Router and WDS.
Use external connectors with high output power to combine flexible antenna, it’s convenient to build long range wireless link while reducing dead spots. Advanced multi-function operation modes offer flexibility in constructing scalable wireless networks for all possible applications.
ENH210EXT is designed to deliver reliable service under harsh outdoor environment with certified IP67 protection and tailored to accommodate multimedia streaming services with data-rate up to 300Mbps. Most importantly, it is built-in encryption standards (WEP, WPA, WPA2, TKIP/AES and IEEE802.1x) ensure maximum security and compatibility.
High speed transmitting rate up to 300Mbps with 2T2R 802.11n
800mW transmit power delivers long-range point-to-point connectivity.
Two external 5 dBi omni-directional antennas provide outside wireless network connectivity for employees or guests with client devices such as laptop computers, tablets, and smartphones.
Can be configured to broadcast up to eight (8) SSIDs. Each SSID can be tagged to a specified company network VLAN for different user access based on established access rights.
Includes a proprietary PoE (Power-over-Ethernet) kit comprised of a PoE injector and Power Adapter. Also includes a mast mount kit with binding strap.
Point-to-Point Protocol over Ethernet at Client Router mode. This function will keep trying when failed or disconnected
Point-to-Point Tunneling Protocol (PPTP) is a method for implementing virtual private networks
Upgrading firmware via web browser, setting are reserved after upgrade
|Reset & Backup||
Reset to factory default. User can export all setting into a file via WEB
Provide MAC address Filter function
|Ping & Trace Route||
Built-in PING function & Trace Route function in Web GUI
MIB I, MIB II(RFC1213), Private MIB
1 x Gigabit Ethernet Port with PoE support
1 x Gigabit Ethernet Port
2 x External N-type connector
(Both Ethernet Ports support Surge Protection to 6KV)
Active Ethernet (Power over Ethernet)
Power Adapter 48V / 0.375A
Access Point / Client Bridge / Client Router / WDS
Auto Channel Selection (Setting varies by Regular Domains)
Distance Control (802.1x Ack timeout)
Multiple SSID (4 SSID)
WDS AP / WDS Bridge / WDS Station
Physical & Environment
|Temperature Range||Operating -20°C~70°C
Storage -30°C to 80°C
|Humidity (non-condensing)||0%～90% typical|
|Dimensions||323mm (L) x 230mm (W) x 107mm (H)|
|Firmware for this product should only be sourced via the EnGenius Networks Europe B.V. websites. If it is sourced elsewhere it may damage your device and invalidate the warranty. We can't provide service support to devices which are not running with ETSI firmware.||EnGenius Networks Europe B.V. Downloads Site||27.10.16|
|EZ Controller Software release notes||Download here||06.10.14|
|EZ Controller NMS Software Ver 3.7.2||Download here||15.05.14|
|Private MIB File||Download here||16.03.12|
|Firmware Ver 1.1.0||Download here||16.03.12|