ENH210 Wireless Outdoor Enterprise Client Bridge features 14dBi high gain antenna dual polarization with high output power and high sensitivity can extend the transmission range to deliver a stable wireless connection. ENH210 integrates 4 operation modes: Access Point, Client Bridge, Client Router and WDS.
With integrated 14dBi dual-polarized antenna and high output power, it’s convenient to build up to 25km long range wireless link while reducing dead spots. Advanced multi-function operation modes offer flexibility in constructing scalable wireless networks for all possible applications.
ENH210 is designed to deliver reliable service under harsh outdoor environment with certified IP67 protection and tailored to accommodate multimedia streaming services with data-rate up to 300Mbps. Most importantly, it is built-in encryption standards (WEP, WPA, WPA2, TKIP/AES and IEEE802.1x) ensure maximum security and compatibility.
High speed transmitting rate up to 300Mbps with 2T2R 802.11n
800mW transmit power delivers long-range point-to-point range of up to 4 miles
Internal 14 dBi directional antenna with dual polarity design with a focused beam array for targeting other outdoor client bridges or providing wireless network connectivity to a specific outdoor area in Access Point mode.
Can be configured to broadcast up to eight (8) SSIDs. Each SSID can be tagged to a specified company network VLAN for different user access based on established access rights.
Point-to-Point Protocol over Ethernet at Client Router mode. This function will keep trying when failed or disconnected
Point-to-Point Tunneling Protocol (PPTP) is a method for implementing virtual private networks
Upgrading firmware via web browser, setting are reserved after upgrade
|Reset & Backup||
Reset to factory default. User can export all setting into a file via WEB
Provide MAC address Filter function
|Ping & Trace Route||
Built-in PING function & Trace Route function in Web GUI
MIB I, MIB II(RFC1213), Private MIB
1 x Gigabit Ethernet Port with PoE support
1 x Gigabit Ethernet Port
Active Ethernet (Power over Ethernet)
Power Adapter 48V DC / 0.38A
Access Point / Client Bridge / Client Router / WDS
Auto Channel Selection (Setting varies by Regular Domains)
Distance Control (802.1x Ack timeout)
Multiple SSID (4 SSID)
WDS AP / WDS Bridge / WDS Station
Physical & Environment
|Temperature Range||Operating -20°C~70°C
Storage -30°C to 80°C
|Humidity (non-condensing)||0%～90% typical|
|Dimensions||323mm (L) x 230mm (W) x 107mm (H)|
|Firmware for this product should only be sourced via the EnGenius Networks Europe B.V. websites. If it is sourced elsewhere it may damage your device and invalidate the warranty. We can't provide service support to devices which are not running with ETSI firmware.||EnGenius Networks Europe B.V. Downloads Site||27.10.16|
|EZ Controller Software release notes||Download here||06.10.14|
|EZ Controller NMS Software Ver 3.7.2||Download here||15.05.14|
|Private MIB File||Download here||16.03.12|
|Firmware Ver 1.1.0||Download here||16.03.12|