Skip to content.  
  • Supports IEEE 802.11a/b/g/n standards with up to a 300 Mbps data rate
  • Up to 29 dBm high RF power on 2.4 GHz for longer range, enhanced wireless coverage
  • Dynamic Channel Optimisation
  • Designed for indoor ceiling or desktop deployments
  • Internal MIMO antenna array
  • Fast roaming when used with a RADIUS Server
More details

Available from Solwise Ltd or one of our UK EnGenius Resellers.

£191.52

Order now

The Neutron Series Wireless Management Solution

The EnGenius Neutron Series of wireless management products can be mixed and matched to create ideal wireless connectivity solutions for hotels, resorts, high schools, universities, corporate campuses, sports stadiums and arenas and for other companies and organizations.

This is a scalable solution for operations that occupy large properties and that need to deploy, monitor, and manage numerous EnGenius EWS Wireless Access Points from one simple and accessible browser-based software platform. EWS Switches can support any small number of EWS Wireless Access Points to several hundred depending on the number of EWS Switches in the network.


The EWS210AP can operate as a stand-alone Access Point connecting to third-party PoE-capable switches but more control and versatile management of the Access Point is achievable when it is part of an EnGenius Neutron Series wireless network management solution because the AP includes firmware that enables it to be immediately discovered, configured, monitored and managed from a compatible Neutron Series PoE+ Switch (EWS5912FP, EWS7928FP or EWS7952FP).

This capability enables IT managers to deploy and manage up to 50 EWS210APs from Neutron Series Switch allowing for simplified management from one browser-based interface including simultaneous firmware upgrades, clustering, traffic monitoring, bandwidth steering and many other features that can be reset or reconfigured from the convenience of the IT manager’s desktop.

Operating in the 2.4 GHz frequency spectrum and supporting 802.11b/g/n standards the EWS210P features wireless speeds up to 300 Mbps, a Gigabit port for connecting to 802.3at/af-capable PoE Switches, and an enhanced receive sensitivity MIMO (Multiple In / Multiple Out) antenna array. As a result, the EWS210AP is ideal for spacious environments such as large homes, small and medium-sized businesses, multiple-floor offices, hotels, hospitals, and other multi-floor buildings.

As the EWS210AP is designed for deployments on ceilings where power outlets may be scarce, it also comes equipped with PoE (Power-over-Ethernet) IEEE 802.3at/af for use with an 802.3at/af-capable PoE injector or 802.3at/af-capable PoE Switches, drawing up to 15.6 watts of power.

To protect sensitive data during wireless transmissions, the EWS210AP offers different industry-standard encryption settings for wireless transmissions, including WEP, WPA-PSK, WPA2-PSK, WPA-PSK Mixed, WPA Enterprise, WPA2 Enterprise, and WPA2 Mixed Enterprise. It also includes MAC address filtering to allow network administrators to offer network access only to verified computers and devices based on their MAC addresses.

Typical Application

Typical Application

Features

Neutron Series Access Point

Can be configured, managed and monitored with several Neutron Series Access Points from the browser-based interface of one Neutron Series Wireless Management PoE+ Switch. After a Neutron Series Layer PoE+ Switch discovers the EWS210AP it can be "added" and set to be "managed" by the Switch. The Neutron Wireless Management solution supports bulk firmware upgrades and other features that can be set and managed across deployed Neutron Series Access Points simultaneously.

Wireless Speeds

Up to 300 Mbps on the 2.4 GHz frequency band for faster file transfers and smoother video streaming.

High Power, Long-Range and Multiple Floor Penetration

Up to 29 dBm on the 2.4 GHz band provides more than twice the wireless coverage over mainstream competitors and enables the wireless signal to penetrate floors, ceilings, and walls for greater device connectivity. Internal MIMO antenna array provides better reception and performance as clients change their orientation.

SSID-to-VLAN Tagging

Can be configured to broadcast up to 8 SSIDs. Each SSID can be tagged to a specified network VLAN for different user access tiers based on established access rights.

Specifications

Technical Specifications

Hardware

RF: 2.4 GHz Frequency Band
Standard: IEEE 802.11b/g/n
Radio: 11b/g/n: 2.412~2.484 GHz
Data Rate: Up to 300 Mbps in both frequency bands
Memory: 128MB
Flash Memory: 16MB
Peak Power: Up to 9W

Antenna Two (2) Internal 5 dBi Internal High Gain Antennas
Physical Interface 1 x RJ-45 Gigabit Ethernet (10/100/1000 Mbps) - PoE capable
1 x Reset Button
1 x Power Connector
Power Requirements Power Supply: 100 to 240 VDC ± 10%, 50/60 Hz
(depends on different countries)
Active Ethernet (Power-over-Ethernet, IEEE 802.3at/af)
Power Adapter (United States) 48VDC/0.375A
Device: 12V/2A
Modulations OFDM: BPSK, QPSK, 16-QAM, 64-QAM, DBPSK, DQPSK, CCK
Operating Channels 2.4 GHz: US/Canada 1-11
Operation Modes Access Point
Multiple BSSID Supports up to 8 BSSIDs
LAN IP (check validity and DHCP server IP range) MAC
SSID-to-VLAN Tagging Supports 802.1q SSID-to-VLAN tagging
Spanning Tree Supports 802.1d Spanning Tree Protocol
Wireless Wireless Mode: 11b/11g/11n
Channel selection (settings vary by country)
Channel bandwidth (Auto, 20 MHz, 40 MHz)
Transmission Rate 2.4 GHz: 11n only, 11b/b/n mix, 11b only, 11b/g, 11g only
QoS WMM  (Wireless Multimedia)

Wireless Management Features
(with Neutron Series Switch)

Management Switches »

  • Access Point Auto Discovery and Provisioning 
  • Access Point Auto IP Assignment 
  • Access Point Cluster Management 
  • Remote Access Point Rebooting 
  • Access Point Device Name Editing 
  • Access Point Radio Settings
  • Traffic Shaping
  • Fast Handover 
  • Seamless Roaming (requires RADIUS server)
  • Access Point Client Limiting 
  • Mesh Network* 
  • Wireless Security (WEP, WPA/WPA2 Enterprise, WPA/WPA2 PSK) 
  • VLANs for Access Point- Multiple SSIDs 
  • Guest Network 
  • Access Point Status Monitoring 
  • Wireless Client Monitoring 
  • Wireless Traffic & Usage Statistics 
  • Visual Topology View 
  • Floor Plan View 
  • Map View 
  • Secure Control Messaging 
  • SSL Certificate 
  • Local MAC Address Database 
  • Remote MAC Address Database (RADIUS) 
  • Unified Configuration Import / Export 
  • Bulk Firmware Upgrade Capability 
  • Intelligent Diagnostics

Environmental & Physical

Temperature Range

Operating: 0 to 50ºC (32º to 122ºF)

Operating humidity: 0 to 90º

Storage temperature: -20ºC to 60ºC (-4Fº to 140ºF)

Certifications FCC, IC, CE

Dimensions & Weights

Dimensions & Weight

Weight: 0.8 lbs.
Length: 6.36” (161.54mm)
Width:  6.36” (161.54mm)
Height: 1.64” (41.66mm)

Package Contents

EEWS210AP Dual Band N300 Indoor Access Point
12V/2A Power Adapter
T-Rail Mounting Kit
Ceiling Mount and Wall Screw Kit
Mounting Bracket
RJ-45 Ethernet Cable
Quick Installation Guide

Downloads

Not yet available.

Related Products